Home / All / INNER TUBE /

GOOD AGING RESISTANCE FLAP FOR PROTECTING INNER TUBE

GOOD AGING RESISTANCE FLAP FOR PROTECTING INNER TUBE

GOOD AGING RESISTANCE FLAP FOR PROTECTING INNER TUBE
GOOD AGING RESISTANCE FLAP FOR PROTECTING INNER TUBEGOOD AGING RESISTANCE FLAP FOR PROTECTING INNER TUBEGOOD AGING RESISTANCE FLAP FOR PROTECTING INNER TUBE
CategoriesINNER TUBE
BrandFengfu Bladder
ModelPCR/LTR/TBR/TBB/OTR
Main MaterialNatural Rubber
ApplicationPCR/LTR/TBR/TBB/OTR
CustomizationAccept customization
FOB portQingdao, Tianjin
Terms of PaymentL/C, Western Union, T/T, Paypal
DownloadDownload pdfDownload pdfDownload pdfDownload pdfDownload pdf
Update TimeApr 25,2025
Detail Information
FLAP

Flap is aslo know as lining belt or mound layer , which is a ring tape used to protect the contact face of inner tube from rim wear .            

It is mounted betwee the inner tube and the rim with a thick middle and thinning from inside to outside on both sides.

There is a center line on the outer surface of the flap, which is used for alignment during installation .

There is also a hole in the center line and  the inner tube valve nozzle goes through from this hole .

The flap does not require high physical and mechanical properties of the rubber, but it should have good aging resistance .

Tubeless tyres fixed to deep rims and ultra-low pressure tyres fixed to special structural rims are compact and do not require flap .

We can install metal plates in the valve mouth area according to customers requirements.

inner tube
                                                                                        Specification
                                            The main dimension ≥ mm



weight  (Kg)
                            section width

middle thickness
      outside          circumference
9.00/8.25-16
180
3.4-3.6
1290
1.15
9.00/8.25-20
181
5.3
1590
1.53
9.75-18
151
4
1465
1.26
9.00/10.00-20
215
5.8-6.2
1638
2.3
11.00/12.00-20
222
6.5-7.3
1658
2.78
11.00-22
227
6.9
1820
2.73
11.00-18
228
6.3-6.5
1464
2.49
12.00-24
236
6.6-7.3
1934
4.03
14.00-20
235
7.3-7.8
1645
2.73
14.00-24
325
7.2
1962
4.03
16/70-20
325
7.3
1660
4.5
16/70-24
323
8.4
1975
5.13
16/15.5-20
288
8.4
1655
4.7
13.00-25
221
9.0-9.2
1968
4.5
17.5-25
323
7.6-7.9
2010
6.5
20.5-25
420
8.7-8.9
2017
8.5
23.5-25
504
8.8-9.1
2020
10.58
Please send your message to us
*Email
Name
Tel
*Title
*Content
Upload
  • Only supports .rar/.zip/.jpg/.png/.gif/.doc/.xls/.pdf, maximum 20MB.
Address